Course NumberCH-02-606W
PDH Hours2
Introduction to Oil Well Artificial Lift Systems

Webinar: Introduction to Oil Well Artificial Lift Systems

Webinar calendar pdhAuthor: Ed Chesny

This Live Webinar course provides an overview of the basic equipment used in lifting crude oil and natural gas from the subsurface reservoir to a tank battery facility in preparation for sale and use. It presents five different systems, what the equipment looks like and how it functions to facilitate the production and sales of hydrocarbon products.

Other key topics covered in this coursework include:

  1. Learn the conditions under which the major lift systems are best utilized.
  2. Learn the three major pumping systems used for lifting crude oil, natural gas, and salt-water for processing, collection, sale, or disposal.
    • Beam or Rod Pumps
    • Progressive Cavity Pumps (PCP)
    • Electrical Submersible Pumps (ESP)
  3. Learn the two lift systems using powered fluids to produce crude oil, natural gas, and salt-water for processing, collection, sale, or disposal.
    • Gas Lift/Plunger Lift
    • Hydraulic/Jet Pumps
  4. Describe how each artificial lift system is powered, monitored, controlled, and functions to facilitate hydrocarbon production.
  5. Describe the conditions under which the lift component parts best function, and how reservoir conditions can dictate which equipment should be used to optimize production and sales.
  6. Describe the conditions under which each lift system will not function properly and likely fail to produce optimally.
  7. Identify which lift equipment best handles tough well production conditions such as frac sand and substantial natural gas flow, either of which can restrict or curtail efficient operations.
  8. Provide historical background on the creation of each artificial lift system and how the manufacturers are working to improve them in the future.
  9. Describe the potential workplace challenges posed each artificial lift system and how good safety practices keep field personnel safe in the remote outdoor workplace.

Learning Objectives

This Live Webinar course is intended to provide you with the following specific knowledge and skills:

  • Learn the different methods used to pump crude oil up-hole from a downhole reservoir to the surface.
  • Recognize & understand the basic equipment utilized by each of the five (5) major artificial lift systems to achieve this goal.
  • Recognize the capabilities & limitations of each type of crude oil lift equipment.
  • Recognize & identify the equipment similarities and differences between each of the systems.
  • Understand which type of artificial lift equipment is best suited for efficient production under variable reservoir conditions to surface tank battery facilities with a variety of handling and processing equipment.
  • Learn how all the produced products are handled, isolated, sold, and/or disposed of in an environmentally safe manner.

Note: This is a live webinar delivered via GoToMeeting. Login instructions will be emailed to you 24-48 hours prior to the webinar and the morning of the webinar. If you have not received your instructions for any reason please call customer support the day of the event. Webinars are live and interactive and students will have the ability to directly interact with and ask questions of the presenter.

We provide technical courses for PDH credits that meet Board requirements for Professional Engineers, Geologists and Land Surveyors. This course is guaranteed to be accepted in AK, AL, AR, FL, GA, IA, IL, ID, IN, KS, KY, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, VT, WI, WV, and WY. Before purchasing this course, please confirm that your state Board is listed above.